Doors Off, Adventure On: How to Remove and Reinstall Your 2025 Jeep Gladiator Doors

One of the best features of the 2025 Jeep Gladiator is its ability to transform into an open-air adventure machine by removing its doors. Whether you’re hitting the trail or enjoying a summer cruise, here’s a detailed guide to safely removing and reinstalling your Gladiator’s doors.

What You’ll Need:

• T50 Torx bit (included in Jeep’s toolkit)
• Ratchet wrench
• A safe place to store doors
• Optional: door storage bags for protection

Removing the Doors

Step 1: Power Disconnection

1. Roll down the windows (if equipped with power windows). This prevents glass damage during removal.
2. Turn off the ignition and remove the key.
3. Open the door fully.
4. Disconnect the wiring harness (for doors with power mirrors or locks):
   • Locate the plastic access panel near the lower hinge inside the door frame.
   • Gently pull back the panel to expose the wiring harness.
   • Press the tab and pull the connector to detach the harness.

Step 2: Remove the Door Strap

1. Unhook the fabric door check strap from the hook inside the Jeep. This strap prevents the door from swinging too far and must be detached before door removal.

Step 3: Remove the Hinge Bolts

1. Using the T50 Torx bit, remove the two hinge bolts from the outside of the door.
   • One bolt is on the upper hinge, and one is on the lower hinge.
2. Keep these bolts in a safe place. The Gladiator may have a bolt storage area under the rear seat for convenience.

Step 4: Lift and Remove the Door

1. With one hand on the interior handle and the other under the door, lift the door straight upward off the hinge pins.
2. Do not twist or drag the door — lift vertically to avoid damaging the hinges.
3. Place the door in a safe location, ideally in a padded storage bag or soft surface.

Repeat the process for each door.

Reinstalling the Doors

Step 1: Align and Insert the Hinges

1. Position yourself carefully and align the hinges with the pins on the body of the Jeep.
2. Slowly lower the door straight down onto the pins until fully seated.
3. Ensure the door opens and closes smoothly before continuing.

Step 2: Reattach the Door Strap

1. Reconnect the fabric check strap to the metal hook inside the cabin.
   • This prevents overextension when the door swings open.

Step 3: Reconnect the Wiring Harness

1. Plug the wiring harness back in until it clicks into place.
2. Push the access panel back into position.

Step 4: Reinstall the Hinge Bolts

1. Using your T50 Torx bit, tighten the upper and lower hinge bolts to secure the door.
   • Do not overtighten — snug is enough to hold it firmly in place.

Step 5: Final Checks

1. Ensure the door opens, closes, and latches smoothly.
2. Confirm power functions (windows, locks, mirrors) work properly.

Tips & Safety

• Never drive without mirrors unless using legal alternative side mirrors.
• Keep your hands clear when lifting and lowering the doors.
• Use proper lifting posture or get help — Gladiator doors can be heavy.

By following these steps, you can confidently remove and reinstall the doors of your 2025 Jeep Gladiator, enhancing your open-air experience while keeping everything safe and secure.